Download THIMEO Stereo Tool v10.41 Latest Version

by admincp · Published September 25, 2024 · Updated October 21, 2024

Table of Contents

Details of Thimeo Stereo Tool:

Download THIMEO Stereo Tool Full Version

Thimeo Stereo Tool download is a piece of software for processing audio files. It boasts excellent sound quality and a variety of interesting features. It is used by around 3000 FM stations, including tiny local stations, 50-100 kW units, and nationwide networks with dozens of transmitters. Thousands of streaming stations, as well as many DAB+, HD, AM, and TV stations, rely on it. It supports both live and stored files. Stereo Tool can do standard audio processing, but it can also resolve many common audio issues immediately and increase the quality of audio delivered to FM radio stations. The complete list of features may be seen deeper down this page.

It is comparable to employing a hardware audio processor. Stereo Tool handles audio from one or more sound cards. It then sends the processed audio to one or more sound cards and streams (IceCast, ShoutCast, or MicroMPX).To use Download Thimeo Stereo Tool Full Version in this manner, download one of the standalone files and configure your own sound cards for input and output.This software-based audio processor has a number of handy features and generates outstanding sound quality.

Free Download Thimeo Stereo Tool is used by more than 1,500 FM radio stations. These include small local stations, 50-100 kW stations, and national networks with dozens of transmitters. It may adjust the volume and color of records, highlight details, and enhance existing stereo effects. It may also restore “broken” stereo pictures, which are common on cassette cassettes, vinyl albums, and low-cost CDs. These images typically cause significant issues when played on a mono system, headphones, or a system with a stereo widener.

Free Download THIMEO Stereo Tool Full Version

For radio, THIMEO Stereo Tool Full Version is especially useful. It has a much bigger output, puts more emphasis on FM, does a good job of encoding audio and RDS for FM radio, and protects highs from distortion caused by compression loss for web radio. Processing latency can be cut down to as little as 12 ms, but the quality will suffer. Latency handling is 93ms at the highest standard level.

Free Download THIMEO Stereo Tool Latest Version

Features of THIMEO Stereo Tool:

Loud and clean: Generates the loudest and cleanest sound on the dial while also improving reception.
Automatic audio restoration: Fixes issues such clipping distortion, low bitrate encoding artifacts, and background noise.
Used by more than 14000 radio stations: Used by thousands of stations in at least 94 countries, including over 4000 FM stations.
Using Stereo Tool as a plugin in your playout software: If your playout software supports VST 2 plugins, VST 3 plugins, DSP plugins, or our proprietary plugin format, download the appropriate plugin or installer and install it in the relevant area. The DSP plugins include an installer that already detects a variety of playout applications; if yours isn’t supported, navigate to its Plugins directory. The VST plugins must be manually placed in the correct area; most programs need you to select where you want it to search for VST plugins. If our own plugin format is available, the binary is often included with the product.
Feeding Stereo Tool from other software on your computer: If you wish to feed Thimeo Stereo Tool Free from a program that does not allow audio processing plugins, or if you simply want to pass all audio (e.g., YouTube videos) through Thimeo Stereo Tool Latest Download, you will need to use a third-party program that installs a “virtual” sound card. You may then transfer audio from other software to that virtual sound card (or set it as the default sound card in Windows so that all audio is automatically routed to it), and then use Stereo Tool to read the input from the virtual sound card and send the output to the real sound card.
Declipper: Repairs clipped audio, removes distortion, and restores dynamics; also used in police forensics labs.
Delossifier: Enhances the sound of MPEG2/MP3 lossy compressed files.
Dehummer: Removes unpleasant continuous sounds, such as a 50/60 Hz hum from faulty wires.
Natural Dynamics: Boosts percussion instruments, which is ideal for restoring dynamics in compressed music.
Automatic Gain Control: Slowly changes the input level. Can speed up significant modifications. Program-dependent dynamic timing
Low Level Boost: Intended for classical music. Increases the level of extremely low-level sounds without compressing louder sounds.
Multiband compressors: Two multiband compressors, selectable number of bands (2-9), program-dependent dynamic timing.
Auto EQ / Bass EQ: Corrects spectrum without compression, provides consistent sound without compromising dynamics.
Stereo effects: Multiple stereo wideners available, AZIMUTH phase problems repaired, mono compatible mode, no phase cancellation, and automatic phase flip for anti-phase input
Immersive Bass: Creates upper bass harmonics, Much warmer and more consistent tone. Makes bass audible with small speakers.
True Bass: Subharmonics Generator, Adds deep bass that is missing, especially in older recordings.
Streaming final clipper: Clean and very loud, hybrid clipping/limiting mode is available, safe to use for low bitrate streaming.
IceCast / ShoutCast stream: IceCast/ShoutCast streaming is built-in, as is MP3 and ogg/vorbis support.
AM processing: Extremely sharp bandpass filters, support for C-QUAM stereo and the NRSC curve, up to 200% asymmetry
FM Stereo / RDS / RDBS: FM Pre-emphasis Built-in stereo and RDS encoder. Remote control with UECP or Telnet. Supports RT+, EON, TMC, EWS, and IH.
FM ITU-R BS.412 limiter: Inaudible BS.412 leveling is required in various EU markets.
FM Composite Clipper: Clean and quite loud. Up to 140% audio volume with 100% FM modulation. Provides 2-3 dB more headroom for highs. Improves reception. Strict ITU-R SM.1268 (‘Stokkemask’) compliance. Become the loudest and cleanest station on the dial!
FM multipath protection: Reduce the RF bandwidth to increase reception. Compatible with all receivers. Up to 30 kilometers larger stereo reception area, Several stations reported issues after switching from alternative processors to Stereo Tool.
FM MicroMPX streaming: Streams the full composite broadcast, including pilot and RDS, to transmitter sites via IP. The minimum necessary bitrate is 320 kbit/s. Redundancy is available, and GPS synchronization is possible.Software and hardware decoders are available.
Built-in microphone processor: Software mixing console (control via tablet!) with two channels. Runs alongside conventional compression, with no additional latency imposed.
SPECTRUM CONTROL: Non-compressing spectrum equalisation COMPRESSORS, Wideband AGC, Two multiband compressors, 2-9 bands, Wideband compressor, Low-level enhancement for classical music.
STEREO WIDENING: Multiple stereo wideners to choose from.

How do I use THIMEO Stereo Tool?

When you plug in a sound card and send the output to a sound card output or stream, Thimeo Stereo Tool manual can be used just like any other hardware audio processing. For this, you will most likely need Stereo Tool’s stand-alone version. On the other hand, Stereo Tool can be used with most playback or streaming apps. You may need to download a VST or DSP plugin for that, depending on the program you work with. Plug-ins for audio processing are not supported by all playout or streaming software. However, you can still route audio through the stand-alone version using tools like VB Cable or Virtual Audio Cable.

FAQs:

How can I get a free trial of Stereo Tool?

You can get the tools from our site. If you use the stand-alone version, it has all the features, but every once in a while, it plays a beep or a spoken word in the processed sound. The trial version can be used for as long as you want.

My station has music format […] , is Stereo Tool suitable for processing my sound?

Yes! Stereo Tool has a lot of choices that you can use to make it work the way you want it to, no matter what kind of music your station plays—pop, rock, jazz, classical, or anything else.

Why is Stereo Tool so cheap? Is there a catch?

There’s no catch! We really enjoy what we do, and we want as many people as possible to use our service. We’d rather sell a lot of licenses at a low price than a few licenses at a high price.

How can I generate FM MPX with stereo and RDS/RDBS on my pc?

Your sound card must be able to handle sample rates of up to 192kHz. If so, you can send a full MPX signal that includes stereo tools v3 and RDS straight to your emitter.

Can I use any 192kHz enabled sound card to generate FM MPX?

In a word, yes. But it’s better if the sound card’s frequency response is spread out. If the sound card has a high pass filter, it gets rid of the lowest frequencies, which could make the output signal go too high. If the sound card has a lowpass filter, it will lower high frequencies, which could make stereo separation less clear. These problems can be fixed to some extent with Thimeo Stereo Tool presets, but it does take a few extra steps to set up.

What if my automation software does not support Stereo Tool integration?

Use a virtual wire, like Virtual Audio wire (VAC) (paid) or VB Cable (free). That would be the easiest thing to do. Once you have installed one of these apps, in your playout software, choose Virtual Cable 1 as the output, and in Stereo Tool, choose it as the input. In Stereo Tool, you can also choose the output device(s) you want to use. That’s all.

Can I integrate Stereo Tool directly into my radio automation system?

That’s possible as long as your automation system works with VST or DSP plugins or our own plugin format. This lets the automation software manage everything that happens in Stereo Tool. Some systems that can use these tools are Station Playlist, ProppFrexx, mAirlist, GML, and SAM Broadcaster. Talk to the company that makes your automation system to find out if you need the 32-bit or 64-bit plugin version. You can use this instead if your playout program doesn’t use plugins: It’s best to use Virtual Audio Cable (VAC) or VB Cable to send the sound to. That’s in the next question.

What type of sound card do I need when I’m only (web-)streaming?

Not at all! That depends on what. There’s no need for a sound card if you only want to watch a playlist and not play music from other sources. You can still use a sound card for monitoring, but that won’t change what your users hear. Any sound card will work if you need external audio, like noise from a microphone. There may be less noise and other artifacts in a signal that comes from better cards.